Archive | Moisture Control RSS feed for this section
Aside

Desiccant Filter – Why and How

Why you should use a Desiccant Filter with your Engraving System and Sandblasting System. A desiccant filter is a great way from preventing moisture from reaching your engraving equipment or contaminating your sandblasting system. When air is compressed, moisture and heat are created. When moisture is exposed to heat, it turns to vapor. Vapor can […]

Read full story Comments { 2 }
Aside

Desiccant Filter – Moisture Control

Desiccant Filter – Moisture Control One of the biggest concerns with your high speed engraving equipment should be moisture control. Depending on the humidity where you live, moisture might be a big problem, or not a problem at all. So, let’s talk a little bit about moisture and how to control it. Moisture is naturally […]

Read full story Comments { 0 }