Archive | FAQ’S RSS feed for this section
Aside

Which Foot Control is Best for Me?

Which Foot Control do I need, Electric or Variable Speed? A popular question that we are asked at Profitable Hobbies is, “Which foot control should I use?” The video below will show you the difference between our electric foot control and the variable speed foot control.

Read full story Comments { 0 }
Aside

Turbine Cleaning – Maintenance

How to Clean your High Speed Turbine using Oil Flushing Technique Flushing your high speed engraving turbine with oil is a good way to clean it out without removing the turbine from the handpiece. Proper maintenance of your high speed engraving turbine (yes – cleaning) will keep it in top shape for many years of […]

Read full story Comments { 1 }
Aside

Desiccant Filter – Moisture Control

Desiccant Filter – Moisture Control One of the biggest concerns with your high speed engraving equipment should be moisture control. Depending on the humidity where you live, moisture might be a big problem, or not a problem at all. So, let’s talk a little bit about moisture and how to control it. Moisture is naturally […]

Read full story Comments { 0 }
Aside

How to Choose a Compressor

Choosing the Right Compressor for the Job One of the most frequently asked questions we get is, “What kind of compressor do I need?” When choosing a compressor, there are many different factors to consider. Some of them include price, noise levels, motor size, oil vs. oil less, tank size (if any), space, portability, air […]

Read full story Comments { 4 }