Wooden Plate High Speed Engraving / Wood Carving – Video – Part 3
In Part 3 of this “How To” Video Tutorial, Dr. Lew takes us through the following steps:
- How to Carve Straight Lines
- Which Burs he uses to do the carving and engraving
- Stippling and Texturing background
- Engraving through the Stencil Film
- Removing the Stencil Film
- Touch Up after the stencil film is removed
Play the Video below:
Click the Play Button to Start the Video
If the video above does not play well – or stops to “buffer” – please press the “PAUSE” button to give the video additional time to download (buffer) from the web server. Just a minute or so should solve the problem.
The video above is Part 3 of 4 of the wood carving video tutorial.
Part 4 (showing the rest of this wood carving project) will be available to view very soon.
Make sure you Subscribe by E-Mail to be notified when they are available to view online.
Alder Wooden Plates for Carving – Available Here.
WAIT – At Profitable Hobbies next Free Webinar, Dr. Lew is going to take us through a Wooden Plate Carving he is doing right now for Utah State University.
This is no ordinary wooden plate, the one is 36 inches in diameter – and worth thou$and$!
Dr. Lew’s Wooden Plate Project Webinar is Wednesday, May 26 at 7:00 MDT – it is free to attend.
You can see all of our Upcoming Webinars at our Upcoming Webinars Page.
If you missed Part 1 or Part 2 of this wood plate carving project, here are the links to them -
No comments yet.